Wonderful Swimming Pool Filter Spares Innovation
Typically with a brand new cartridge installed the pressure should be between 8 and 12. After usage of 2 to 8 weeks depending on the size of your filter check the pressure gauge again if its up near 20 then its time to clean the cartridge. Cleaning your cartridge with a garden hose or any other means will be sufficient for normal maintenance just to remove debris from the filter. After cleaning and reinserting the cartridge you should see the pressure gauge go back down to the 8 to 14 range. This indicates the filter cleaning was successful and your pool should again filter normally.
Its important to know this as choosing the wrong water filter cartridge will not solve the specific problem you want to solve. There are water filter cartridges designed for a variety of purposes. The most common are sediment removal water softening bacteria reduction and taste and odor improvement. There are also multipurpose water filter cartridges. Sediment removal - Water filter cartridges designed to remove sediment are perhaps the simplest in design nevertheless they are very effective in what they do. A typical sediment removal water filter is not much different from those filters used for coffee except of course the materials used are prepared for a much larger water volume and are therefore much more resistant and durable.
Most Popular This Week
It is always recommended that a combination of water filter cartridges to make up a good water filtration system. The most common water filter cartridges which available in the market are as follows: Sediment Cartridge. This is normally used as pre-filter due to its ability to remove sand fine particles silt cryptosporidium and turbidity from your water. Sediment filters are normally rated by the size of particles they remove in microns (One micron is one-thousandth of a millimeter). The smaller microns remove smaller sediments and the bigger microns remove bigger sediments.
Carbon cartridges initially was in granules form and had been used for centuries to purify water. It works well and is still available in that form but there is now another choice in carbon filtration. New technology enables manufacturers to produce filters in the form of porous solid blocks which are superior in every way to filters made of granular carbon. The latest technology in carbon filters is the so-called modified carbon block (MCB) in which filter blocks are built from fibers in a slurry of carbon particles. Some carbon cartridges have incorporated KDF-55D which is zinc and copper to make them bacteriostatic. That means that bacteria cannot grow inside the filter.